Which file should I choose?
Use NSYEDCOC_2D-front.dxf (revision 1.0) to insert the supplied editable drawing into your layout.
Use NSYEDCOC-3D-simplified.stp (revision 1.0) to place the original solid geometry in your 3D assembly.
Steel FS accessories - 2 earthing collect + rail supports
- Equipment / resource
- Steel FS accessories - 2 earthing collect + rail supports
- Manufacturer
- Schneider Electric
- Resource type
- Product
- Source-model envelope
- 100.6 × 60.7 × 20 mm
Downloads & Requests
About this equipment
What it does
Schneider Electric Steel FS accessories - 2 earthing collect + rail supports: original DXF / STEP for substation insulation or transformer equipment layouts.
In plain English
A transformer transfers electrical energy between coils of wire, commonly to change an AC supply from one voltage to another.
Create 2D and 3D drawings by describing what you need
- Create 2D and 3D from a description
- Edit in plain words
- Add equipment from this library
2D drawing and 3D model · Sample project
Choosing and using the files
What is included?
2 inspected originals for Schneider Electric Steel FS accessories - 2 earthing collect + rail supports: NSYEDCOC_2D-front.dxf (DXF); NSYEDCOC-3D-simplified.stp (STEP).
Before using it
- Match Schneider Electric Steel FS accessories - 2 earthing collect + rail supports and the exact source filename shown above.
- The supplied model has approximate X × Y × Z bounds of 100.6 × 60.7 × 20 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
- The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
- The source was checked on 2026-11-11; recorded file revisions: NSYEDCOC_2D-front.dxf — 1.0; NSYEDCOC-3D-simplified.stp — 1.0. Use Documentation & sources to check for a newer issue.
File details & source
NSYEDCOC 2D-front
DXF · 15 KB · Rev 1.0
Original filename: NSYEDCOC_2D-front.dxf
Original manufacturer DXF geometry
NSYEDCOC-3D-simplified
STEP · 71 KB · Rev 1.0
Original filename: NSYEDCOC-3D-simplified.stp
Original manufacturer STEP geometry
Questions about this resource
Which original files are supplied for Steel FS accessories - 2 earthing collect + rail supports?
2 inspected originals for Schneider Electric Steel FS accessories - 2 earthing collect + rail supports: NSYEDCOC_2D-front.dxf (DXF); NSYEDCOC-3D-simplified.stp (STEP).
Where did these Schneider Electric files come from?
Schneider Electric supplied the original files through https://www.se.com/us/en/download/document/NSYEDCOC_3D-CAD/. The source reference, revision, original bytes and checksum are retained with each download.
Documentation & sources
File origin and additional details
Original publisher: Schneider Electric. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
- NSYEDCOC 2D-front
NSYEDCOC_2D-front.dxf ↗ · Rev 1.0 · Acquired 2026-11-11 · Schneider Electric - NSYEDCOC-3D-simplified
NSYEDCOC-3D-simplified.stp ↗ · Rev 1.0 · Acquired 2026-11-11 · Schneider Electric
- Manufacturer
- Schneider Electric
- Resource
- Product
- Formats
- DXF / STEP
- Regional source coverage
- Global
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More transformers & earthing · More Schneider Electric drawings · Request other equipment