Which file should I choose?
Use HORUS_3P_LUG_WO_AUX.stp (revision 01) to place the original solid geometry in your 3D assembly. The ZIP contains the unmodified HORUS_3P_LUG_WO_AUX.stp.
Tesys-D-Contactor-D115 3P-LUG without AUX
- Equipment / resource
- Tesys-D-Contactor-D115 3P-LUG without AUX
- Manufacturer
- Schneider Electric
- Resource type
- Product
- Manufacturer configuration
- Tesys-D-Contactor-D115-CAD 3P-LUG without AUX EN
- Named pole configuration
- 3P
- Source-model envelope
- 120 × 154.9 × 124 mm
Downloads & Requests
About this equipment
What it does
Schneider Electric Tesys-D-Contactor-D115 3P-LUG without AUX: original STEP for motor-control or operating equipment layouts. Tesys-D-Contactor-D115-CAD 3P-LUG without AUX EN.
In plain English
A contactor is an electrically operated switch. A small control signal operates its mechanism to switch a separate power circuit.
Create 2D and 3D drawings by describing what you need
- Create 2D and 3D from a description
- Edit in plain words
- Add equipment like the Tesys-D-Contactor-D115 3P-LUG without AUX
2D drawing and 3D model · Sample project
Choosing and using the files
What is included?
1 inspected original for Schneider Electric Tesys-D-Contactor-D115 3P-LUG without AUX: HORUS_3P_LUG_WO_AUX.stp (STEP). The manufacturer describes this configuration as Tesys-D-Contactor-D115-CAD 3P-LUG without AUX EN.
Before using it
- Match the recorded manufacturer configuration: Tesys-D-Contactor-D115-CAD 3P-LUG without AUX EN
- Named pole configuration: 3P
- The supplied model has approximate X × Y × Z bounds of 120 × 154.9 × 124 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
- The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
- The source was checked on 2026-11-11; recorded file revisions: HORUS_3P_LUG_WO_AUX.stp — 01. Use Documentation & sources to check for a newer issue.
File details & source
HORUS 3P LUG WO AUX
STEP · 113 KB · Rev 01
Original filename: HORUS_3P_LUG_WO_AUX.stp
Original manufacturer STEP geometry
Questions about this resource
Which original files are supplied for Tesys-D-Contactor-D115 3P-LUG without AUX?
1 inspected original for Schneider Electric Tesys-D-Contactor-D115 3P-LUG without AUX: HORUS_3P_LUG_WO_AUX.stp (STEP). The manufacturer describes this configuration as Tesys-D-Contactor-D115-CAD 3P-LUG without AUX EN.
Where did these Schneider Electric files come from?
Schneider Electric supplied the original files through https://www.se.com/us/en/download/document/LC1D115006M5-CAD/. The source reference, revision, original bytes and checksum are retained with each download.
Documentation & sources
File origin and additional details
Original publisher: Schneider Electric. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
- HORUS 3P LUG WO AUX
HORUS_3P_LUG_WO_AUX.stp ↗ · Rev 01 · Acquired 2026-11-11 · Schneider Electric
- Manufacturer
- Schneider Electric
- Resource
- Product
- Formats
- STEP
- Regional source coverage
- Global
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More automation & controls · More Schneider Electric drawings · Request other equipment